50-10pcs Waterproof Cable Wire Connectors For Garden Auto Lawn Mower 3-Pore Terminal Blocks Robotic Lawnmower Connector

Raw materials: polypropylene(PP), polycarbonate(PC), tin-phosphor bronze(PB), silicone grease, tin-cerium.

Operating environment: temperature-30℃~+70℃

Relative humidity:< 85% Atmospheric pressure: 70-106KPa

Insulation resistance: Insulation resistance between any two terminals≥1×10MΩ(normal temperature wet)

Contact resistance: The contact resistance between the wiring card and the wire is less than 5mΩ

Dielectric strength: Apply 2000V DC voltage(or 1400V AC) between the metal wire of the connected module and the insulating shell(sleeve, leather), and the module will be non-destructive or spar k breakdown within 1 minute.

Operation introduction:
1. Screw the pair of wires that need to be connected primary.
2. Hold the end of the twisted pair at 19mm(Note: Do not damage the insulation layer!)
3. Hold the terminal block, and with the button down, insert the dual wire along the port to the bottom.
4. Use crimping pliers to crimp the terminals.
Scope of application: used for two-wire or three-wire connection, such as network line/telephone line connection
Scope of application: 0.65-1.63mm, including insulated wire diameter 3.18mm

Packing Included:
10*314 terminal block

Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.